创世彩票网

中文版 English Pусский Français
Tel:18865912027
Your current location:Home > Repair > Technical Know-how

Technical Know-how

No.

Breakdown

Symptoms

Causes

Solutions

1

创世彩票网 No discharging

During normal production or starting up the machine, materials do not discharge.   

Insufficient water when starting up;
Coarse granularity of the material;
Inversion of main motor;
Unbalanced temperature;
Residue inside the cylinder;

Add water to required level;
Grind the material to required granularity;
Change the phase sequence of the incoming line of the motor;
Adjust temperature to required level;
Stop the machine to clean it and restart it till it’s cleaned.

2

Abnormal discharging

Discharging too fast
(over puffed)

High moisture content of the material;
High temperature in zone II;
Temperature controller out of control.

Decrease moisture content;
Lower temperature in zone II;
Change temperature controller.

3

Products do not puff。

Low temperature in zone II;

Adjust temperature to required level;

4

Abnormal cutting

创世彩票网 Products do not shape up or have burrs.

The spaces between some cutting tools are too large。

Readjust the spaces.

5

Main shaft cannot be demounted.

创世彩票网 When the power is cut or when production is finished, the main shaft cannot be demounted。

The cylinder is stuffed with raw materials;
The gear box is damaged.

Heat to gelatinization point;
Open the gear box to check.  

Jinan Shengrun Machinery Co., Ltd.
0086-18865912025
0086-531-89654200
No. 18, Area 3, Xiaoluzhuang Industrial Park, Tianqiao, Jinan, China

Contact

Tel: 0086-531-89654200
Phone: 0086-18865912025
Site:http://www.buxempire.com/eng/
Address:No. 18, Area 3, Xiaoluzhuang Industrial Park, Tianqiao, Jinan, China

广东11选5 全民彩导航 全民彩导航 河北11选5 全民彩开户 创世彩票是真的吗 彩宝彩票平台 诚信网投导航 创世彩票平台 江苏11选5